Our online cable or wire size calculator tool makes it easy to establish the correct size of cables for any DC power system. 

Cable sizes are particularly important for low voltage battery cables, solar panels, wind turbines and load cables. 

Voltage drops through incorrectly sized cables are one of the most common reasons for low voltage (12V, 24V or 48V) system faults. If the cable is far too small, it can be very dangerous as the cable will heat up and potentially cause a fire. Undersized cables also waste energy.

Conversely, too large a cable and you are simply wasting your money on good copper.

How To Use The Cable Size Calculator
1 - Enter percentage cable loss acceptable [normally approx 2 or 3%].
2 - Enter system voltage.
3 - Enter max amps to be carried by the cable [amps = watts / voltage].
4 - Enter max length of cable run required.
5 - Click "Calculate" - results are shown in the closest standard metric & AWG cable sizes.


All cable sizes given on this page refer to single core HO7RNF rubber insulated cable, at an ambient temperature of 30 deg C, and a conductor temperature of 85 deg C max.

Cable sizes should only be used as a guideline and if not using HO7RNF cable, all figures should be checked against the manufacturers data sheet. Also, all cables should be fused / current protected to their max rating or less.

Disclaimer : We (www.solar-wind.co.uk) accept no legal liability for any issues caused by using this cable sizing calculator.

Need Help ?

For pre-sales support call us on 01502 589407

Product added to wishlist
x

ATTENTION

After your payment is completed, please wait until you are redirected back to our shop. Do not hit the back button. Thank you.