The 9m Leading Edge Guyed Tower is a complete tower assembly suitable for the LE-300, LE-450 & LE-600 Wind Turbines which a 48.3mm dia mounting. Used as a cost effective solution to getting your Leading Edge Turbine airborne, the tower is also quick and easy to install with a minimal tool requirements.
The Guyed Tower is supplied in 3 separate 3m long tower sections that connect together to create a 9m tower. Alternatively, only 2 of the sections can be used to make a 6m tower – although a higher tower will always result in better wind turbine performance.
We have designed this guyed tower to be installed with the minimum of cost and effort! This means that in most cases concrete foundations are not required and our novel spiral earth anchors can be driven directly into the earth. 4 guy anchors are used to secure 8 stainless steel guy wires that are then connected to the tower in various positions. All of the guy wires are supplied crimped and terminated at one end and with all of the rigging screws and wire grips needed to adjust the guy wires to the correct length.
Constructed from heavy duty steel alloy, all components are galvanised to ensure years of trouble free service.
The 9m Guyed Tower is supplied with the following components:
- Qty 3 x 3 Metre Sections
- Qty 8 x Pre-fabricated Guy Ropes
- Qty 1 x Hinging Base
- Qty 4 x Ground Anchors
- Qty 4 x Base Staples
- Qty 8 x Rope Tensioner
- Qty 1 x Fixings kit and Accessories